Three Phase Power Distribution Electrical Transformer All Copperaluminum Customizable

• Customization: Available
• Application: Power, Electronic, Instrument
• Phase: Three
• Model NO.: PEC-S-630/11/0.4
• Core: Core-type Transformer
• Cooling Method: Dry-type Transformer
• Winding Type: Two-winding Transformer
• Certification: ISO9001-2000, ISO9001, CCC
• Usage: Combined Transformer, Power Transformer, Distribution Transformer
• Frequency Characteristics: Power Frequency
• Shape of Core: OD
• Name: 3 Phase Dry Type Transformer
• Model Number: Pec-S-630/11/0.4
• Color: Red
• Use: Distribution Transformer, Cast Resin Transformer
• Type: Dry Type Cast Resin Transformers
• Core Material: Silicon Steel
• Winding: Cooper
• Reference Standards: IEC60076
• Rated Capacity: 630 kVA
• Capacity: 3150kVA or Customized
• Accessories: Fans, Enclosure
• Insulation Level: as Per IEC Standard
• Rated Voltage-Primary: 10kv, 6kv
• Model No.: Epoxy Resin Pouring Transformer
• Weight: Pearl Electric(PE)
• Transport Package: Wooden Case Packing, Container Shipping
• Specification: 125K
• Trademark: PEARL ElECTRIC(PE)
• Origin: China
• HS Code: 8504210000
• Production Capacity: 4000

Product Description

 

 

Product Description

PRODUCT OVERVIEW
 

Technical parameters of dry-type transformers
1. Frequency of use: 50 / 60HZ;
2. No-load current: < 4%;
3. Dielectric strength: 2000V/min without breakdown; test instrument: YZ1802 pressure tester (20mA);
4. Insulation grade: F grade (special grade can be customized);
5. Insulation resistance: ≥2M ohm test instrument: ZC25B-4 type megger <1000 V);
6. Connection mode: Y/Y, △/Y0, Yo/△, self-coupling (optional);
7. Allowable temperature rise of the coil: I00K;
8. Heat dissipation method: natural air cooling or temperature-controlled automatic heat dissipation;
9. Noise coefficient: ≤30dB

 

Epoxy resin pouring transformer is a solid insulation encapsulated winding power transformer. Epoxy resin dry-type transformer uses epoxy resin as insulation material. High and low voltage winding is made of copper strip (foil), epoxy resin is poured and solidified in vacuum to form high strength FRP body. Insulation grade is F and H. Epoxy resin dry-type transformer has the characteristics of good electrical performance, strong lightning shock resistance, strong short-circuit resistance, small size and light weight etc.. The temperature display controller can   be installed to display and control the operating temperature of the transformer winding to ensure the normal service life of the transformer.

 

Product Parameters

Transformer Type	Resin Cast Dry Type
Model	SCB10-50/10
Number of Phase	Three Phase
Winding Type	Two Winding
Winding Material	Aluminum/Copper
Rated Capacity	50kVA
High Voltage	10/11kV
Low Voltage	0.4kV
Tapping Range	±2x2.5%
Impedance Voltage	4%
Load Loss (120°C)	1kW
No-load Loss	0.27kW
No-load Current	2%
Frequency	50/60Hz
Connection Group	Yyn0/Dyn11
Cooling Method	ANAF
Insulation Class	F
Thermal Class	F1
Protection Level	IP00/IP20/IP30
Climatic Class	C2
Environmental Class	E2
Temperature Rise	100K
Operation Altitude	≤1000m
Size	950x750x915mm
Weight	575kg

SCB10 20kva 25kva 50kva 80kva 100kva 160kva 200kva 350kva 400kva 10kv 11kv 0.4kv Dry Type Transformer 500kva 600kva 700kva 750kva 800kva 1000kva 1600kva 2500kva 3000kva 3 Phase Cast Resin Isolation Electric Power Transformers

 

 

Production Process

Main feactures
1. Low loss, low partial discharge, low noise, strong heat dissipation, and can be operated at 120% rated load under forced air cooling.
2. It has good moisture-proof performance and can operate normally under 100% humidity. It can be put into operation without pre-drying after shutdown.
3. It is safe to operate, fire-resistant, non-polluting, and can be installed directly in the load center.
4. Equipped with a complete temperature protection control system to provide reliable protection for the safe operation of the transformer.
5. Maintenance-free, simple installation and low overall operating cost.
6. According to the operation research of the products that have been put into operation, the reliability of the products has reached the international advanced level.

 

Company Profile

Our company is committed to providing customers with safe, efficient and intelligent power transmission solutions, and has become a leading enterprise in the domestic nuclear power dry-type transformer and new energy box-type substation industry and a leading enterprise in the environmental protection and energy-saving transformer industry.

 

Certifications

We have established a sound quality management system, and have passed the certification of ISO9001:2015 quality management system, ISO14001:2015 environmental management system, and ISO45001:2018 occupational health and safety management system.

In order to ensure product quality and in order to meet the development and supply of our dry-type transformers in overseas international markets, we all participate in type and special tests of internationally recognized independent testing laboratories, and obtain relevant reports.

 

Packaging & Shipping

 Production Equipments

Product recommendation

 

FAQ

 

Q1: Are you a manufacturer or trading company?
A1:  We are manufacturer that has been founed in 2004.

Q2: How long have you been worked in the electric industry?
A2: We have been worked in the electric industry for more than 20 years. 

Q3: How long is the warranty period?
A3: It is 1 year.

Q4: Would you accept using customer's logo?
A4: Yes, we can provide OEM and ODM service.

Q5: What's the MOQ?
A5: It is 1 set.

Q6: What's the payment terms?
A6: We accept T/T, Western Union, PayPal, etc.

Q7: How long is the delivery time?
A7: Generally it is 14-20 days, it depends on the order quantity.

Q8: What is the standard of package?
A8: Export standard package or special package according to customer's requirement.