| Customization: | Available |
|---|---|
| Technics: | Cold Pressing |
| Standard: | GB |
|
Still deciding? Get samples of US$ 15/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1 Product Display
Overhead power line cable accessory NLL type tension clamp
(1) Material: Aluminium Alloy;
(2) Type: NLL Type;
Overhead power line cable accessory NLL type tension clamp are used to fix conductor and ground wire through insulators or link fitting to tower arms or substation structrues. NLL series bolt type aluminium alloy strain clamp is used to AAC and ACSR, the conductor may be wound by aluminium tape or performed armour rods for protecting .
Overhead power line cable accessory NZJA-2 type tension clamp
(1) Material: Aluminium Alloy;
(2) serve conduct: 16-70mm2;
Overhead power line cable accessory NZJB-2 type tension clamp are used to fix conductor and ground wire through insulators or link fitting to tower arms or substation structrues. NZJA-2 bolt type aluminium alloy strain clamp is used to AAC and ACSR, the conductor may be wound by aluminium tape or performed armour rods for protecting
2 Product classification
Tension clamps can be roughly divided into two categories according to their structure and installation conditions:
Category 1: Tension-resistant wire clamps must withstand all the tensile force of the conductor or lightning protection wire. The clamp's holding force is not less than 90% of the rated tensile strength of the installed wire or lightning protection wire, but it does not serve as a conductor. This type of wire clip can be removed after the wire is installed and used separately. This type of cable clamps include bolt-type tension cable clamps and wedge-type tension cable clamps.
Category 2: In addition to bearing all the tensile force of the wire or lightning protection wire, the tension clamp also serves as a conductor. Therefore, once this type of cable clamp is installed, it cannot be disassembled and is also called a dead cable clamp. Since it is a conductor, the installation of the cable clamp must be carried out carefully in compliance with the relevant installation operating procedures.
3 Features
1) The wire clip has high strength and reliable grip. The gripping strength of the wire clip should not be less than 95% CUTS (calculated breaking force of stranded wire).
2) The clamp distributes the stress on the twisted wire evenly without damaging the twisted wire, improves the vibration resistance of the twisted wire, and greatly extends the service life of the conductor.
3) Simple installation and convenient construction. The construction time can be greatly shortened, and no special tools are required, and the operation can be completed by one person.
4) The installation quality of the cable clamps is easy to ensure and can be inspected with the naked eye without special training.
5) Good corrosion resistance and high-quality materials. The material is exactly the same as the wire, ensuring that the clamp has strong resistance to electrochemical corrosion.
6) An anti-theft ring is optional to effectively solve the anti-theft problem.
Parameter:
NLL Series Tension Clamp
|
Catalog No. |
Conductor Dia. (MM) |
Dimensions (MM) |
Rated Failure Load (KN) |
Weight |
|||
|
M |
C |
L1 |
L2 |
||||
|
NLL-1 |
5.1-11.5 |
16 |
19 |
140 |
120 |
40 |
1.0 |
|
NLL-2 |
8.9-18.5 |
16 |
24 |
176 |
187 |
40 |
1.6 |
|
NLL-3 |
5.0-15.0 |
16 |
18 |
310 |
160 |
70 |
1.9 |
|
NLL-4 |
12.1-21.8 |
16 |
30 |
298 |
284 |
90 |
4.1 |
|
NLL-5 |
18.0-30.0 |
22 |
36 |
446 |
342 |
120 |
7.0 |
|
NLL-6 |
27.0-38.0 |
22 |
44 |
560 |
360 |
120 |
8.1 |
|
NLL-2A |
7.0-16.0 |
16 |
20 |
111 |
137 |
40 |
1.6 |
|
NLL-4A |
12.0-21.8 |
16 |
30 |
298 |
292 |
102 |
3.9 |
|
NLL-5A |
18.0-30.0 |
16 |
32 |
190 |
235 |
70 |
3.9 |
|
NLL-6A |
27.0-38.0 |
16 |
36 |
296 |
255 |
70 |
4.0 |
Advantages:
1.Convenient installation: No need of special tools and cutting the wire
2.Grip and Failure load: Increased as the body and the wedge core of Bolt Type Strain Clamp is made of high strength aluminum alloy materials
3.Features:With Self-locking function to pull the wire tight ,which increasing the safety and reliability of the line and reusable advantage after removing
4.Significant effect:No cutting of the wire brings electrical contact point reduce, low loss, energy-saving of transmission line.
Product productive process
Quality Control
The function of tension clamp:
1. Connection function, used for line corners, connections, and terminal connections.
2. Protection function, its performance and efficacy can protect and assist vibration reduction of optical cables.
3. Fixing function: the tension clamp can withstand the tension of the wire and is used to fix the wire or the cable of the tower.
Bolt type aluminum alloy tension clamps are suitable for fastening various overhead conductors at corners and terminal poles in power plants, substations and distribution lines.
NLL series strain clamps are suitable for aerial line up to 10kv, fixing aluminium wire or steel core aluminium wire
on the strain pole.
HeBei LeiCheng Since its inception, always adhere to the "quality first, credit first" business purpose, constantly develop innovative products, expand the market, and with many scientific research units, colleges and universities work closely and hired professional and technical personnel as guideline, USES the domestic and foreign advanced technology, experienced several years of hard struggle, finally achieved gratifying results.
Specifically Industry production of All kinds of Transformer, Transformer Substation and accessories
(single-phase three-phase conversion power supply, control transformer, three coherent transformer, CNC machine tool control transformer, main transformers, power transformers, special transformers, voltage regulator, voltage regulator, reactor, inverter, soft start and other CNC machine tools widely used) Fastener, Electric power fittings, All kinds of Steel etc...
The company pays attention to the development of products, research and development at the same time, constantly strengthen the quality management.
Office Environment
Factory
You can rest assured that the packaging of the product, as the last link we strictly control!
Q: Are you a Manufacturer, factory or Trading company ?
A: Yes, We are engaging in the research and development, production and operation of transformer for over 10 years.
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q: Production Time?
A: In general, it take 4~6weeks and it depend on the different style.
Q: What's your payment terms?
A: Pay by T/T and L/C is acceptable.
Q: How do you conduct quality control in your factory?
A: We implement 100% QC inspection to ensure every product is qualified. We have over 10 times QC inspections during the manufacturing process from raw material to the final products.Each of our unit has 3C certificate. If you need any other Certificate, we can help you to apply it.
Q: Do you have the products in stock?
A: Normally no. All our products produce depending to your order quantity.
Q: What should provide to make custom transformer ?
A: Technical drawing and technical specification document are the best, or you can tell us some details technical specification date as below "Quotation and Ordering Required Information".
Q: Could I have your catalog and price list for trial order in MOQ quantity?
A: All of our products are showing on Made-in-China or official website, you are always welcome to ask us to get more information directly.
Our plants produce all electric power fittings, including Cross Arm, Stay wire, Clamp, U bolt, Guy Clip, Thimble Clevis, PD Clevis and more. Related products can be found on our home page, or contact me directly, let me help you!
Welcome to our homepage to see more content!
){kind=link}