| Customization: | Available |
|---|---|
| Application: | Power, Electronic, Instrument, Lighting, Rectifier, Audio |
| Phase: | Single |
|
Still deciding? Get samples of US$ 800/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Detail
1. Product Display
4. Product Structure
Product Process
Product Application
The Farady overhead transformer may be used alone for the supply of a single phase load or as one of three units in a bank for the supply of a three phase load.
The unit may be direct mounted to a wooden or concrete pole, or cluster mounted on a pole for three phase use.
Our single phase overhead distribution transformer is commonly used in various places including rural areas, remote regions and scattered villages to provide high quality power supply for daily lighting, agricultural production and industrial plants.
Aside from these, it is also suitable for the energy saving projects for railway and urban grid.
Single Phase Pole Mounted Transformer Optional Accessory
| Surge arrester | Low voltage circuit breaker |
| Protective link | 4a/Circuit breaker emergency control |
| Current-limiting fuse | 4b/Signal light |
| Protecto-combo | Tap changer |
| Dual voltage switch | Tank pressure relief |
| Single Phase Transformer Test Report | |||||||||||||
| 1,Specification | |||||||||||||
| Rated Capacity | 15 | Product Type |
DL-15/19.92/0.24 (0.12) |
60HZ | Factory Serial No. |
||||||||
| 3Voltage Combination | HV(kV) | 19.92 | Current | HV(A) | 0.753 | Angular displacement | II0 | ||||||
| LV(kV) | 0.24 | LV(A) | 62.5 | ||||||||||
| 2, Measurement of voltage ratio | |||||||||||||
| Tapping Position | HV and LVThe Voltage Value of the Test The Grade and Accuracy: QJ35 A Grade 0.2 |
HV(V) | LV(V) | HV/LV(%) | |||||||||
| A | 19920 | 240 | 0.048 | ||||||||||
| B | 19422 | 0.031 | |||||||||||
| C | 18924 | 0.064 | |||||||||||
| D | 18426 | 0.033 | |||||||||||
| E | 17928 | 0.067 | |||||||||||
| 3, Measurement of winding resistance (Routine) | |||||||||||||
| Tapping Position | Winding Resistance Measurement |
HV (Ω) | LV(Ω) | ||||||||||
| A | 92.48 | X1X2 (Ω) | 0.01121 | ||||||||||
| B | 90.23 | ||||||||||||
| X2X3 (Ω) | 0.005759 | ||||||||||||
| C | 87.91 | ||||||||||||
| D | 85.64 | ||||||||||||
| X1X3 (Ω) | 0.01653 | ||||||||||||
| E | 83.26 | ||||||||||||
| The Meter NO. and Grade of Accuracy | BZC3395 Grade 0.2 |
Temperature | 32ºC | Humidity | 65% | ||||||||
| 4,No-load loss and no-load current test. | |||||||||||||
| Test Items | No-Load Loss at 100% rated voltage W | No-Load Current % | |||||||||||
| Measured Value | 53 | 0.41 | |||||||||||
| 5,Load loss and Short circuit test. | |||||||||||||
| Test Items | Load Loss at 85°C and rated voltage W | Total Loss W | Short Circuit Impedance at 85°C | ||||||||||
| Measured Value | 128.5 | 181.5 | 1.97 | ||||||||||
| 6, Applied voltage test | |||||||||||||
| Power Frequency withstand Voltage Test |
|||||||||||||
| Test Time | 60 S | ||||||||||||
| The Test Voltage(kV) | HV50 / LV5 | ||||||||||||
| 7,Induced Over Voltage Withstand Test | |||||||||||||
| Induced Over Voltage Withstand Test(kV) |
0.48 | ||||||||||||
| 8, Insulation Resistance test | |||||||||||||
| location | Insulation Resistance( M Ω) at 10ºC R60 | ||||||||||||
| HV-E | >1500 | ||||||||||||
| LV-E | >1500 | ||||||||||||
| 9, Other Information. | |||||||||||||
| The Active Parts Weight of Lifting |
The Weight of Insulation Oil | Total Weight | The Temperature Rise of the Oil |
Oil Pressure | |||||||||
| 120 | 70 | 230 | <65K | 50KV | |||||||||
| 10,Leakage test (Routine) | |||||||||||||
| Test method | Applied pressure(kPa) | Duration(h) | Residual pressure(kPa) | Result | |||||||||
| The static pressure method |
20 | 24 | 18 | No leakage and no damage |
|||||||||
| 11, Outer inspection | |||||||||||||
| The nameplate, sign, earthing terminal, and mark of terminal meet the requirement. There is no evidence of leakage. | |||||||||||||
Related Products
Company Profile
HeBei LeiCheng Since its inception, always adhere to the "quality first, credit first" business purpose, constantly develop innovative products, expand the market, and with many scientific research units, colleges and universities work closely and hired professional and technical personnel as guideline, USES the domestic and foreign advanced technology, experienced several years of hard struggle, finally achieved gratifying results, specifically Industry production of single-phase three-phase conversion power supply, control transformer, three coherent transformer, CNC machine tool control transformer, main transformers, power transformers, power transformers, special transformers, voltage regulator, voltage regulator, reactor, inverter, soft start and other CNC machine tools widely used, the company pays attention to the development of products, research and development at the same time, constantly strengthen the quality management.
Office Environment
Factory
Certifications
FAQ
1. Who we are ?
We are based in HeBei, China,sell to Domestic Market(80.00%),Southeast Asia(20.00%). There are all about 1200-1500 people in our company.
){kind=link}