150kVA Dry Type Power Distribution Electric Frequency Transformer for Transmission

• Customization: Available
• Application: Power, Electronic, Instrument
• Phase: Three
• Model NO.: PEC-S-630/11/0.4
• Core: Core-type Transformer
• Cooling Method: Dry-type Transformer
• Winding Type: Two-winding Transformer
• Certification: ISO9001-2000, ISO9001, CCC
• Usage: Combined Transformer, Power Transformer, Distribution Transformer
• Frequency Characteristics: Power Frequency
• Shape of Core: OD
• Name: 3 Phase Dry Type Transformer
• Model Number: Pec-S-630/11/0.4
• Color: Red
• Use: Distribution Transformer, Cast Resin Transformer
• Type: Dry Type Cast Resin Transformers
• Core Material: Silicon Steel
• Winding: Cooper
• Reference Standards: IEC60076
• Rated Capacity: 630 kVA
• Capacity: 3150kVA or Customized
• Accessories: Fans, Enclosure
• Insulation Level: as Per IEC Standard
• Rated Voltage-Primary: 10kv, 6kv
• Model No.: Epoxy Resin Pouring Transformer
• Weight: Pearl Electric(PE)
• Transport Package: Wooden Case Packing, Container Shipping
• Specification: 125K
• Trademark: PEARL ElECTRIC(PE)
• Origin: China
• HS Code: 8504210000
• Production Capacity: 4000

Product Description

Product Description

 

PRODUCT OVERVIEW
 

Technical parameters of dry-type transformers
1. Frequency of use: 50 / 60HZ;
2. No-load current: < 4%;
3. Dielectric strength: 2000V/min without breakdown; test instrument: YZ1802 pressure tester (20mA);
4. Insulation grade: F grade (special grade can be customized);
5. Insulation resistance: ≥2M ohm test instrument: ZC25B-4 type megger <1000 V);
6. Connection mode: Y/Y, △/Y0, Yo/△, self-coupling (optional);
7. Allowable temperature rise of the coil: I00K;
8. Heat dissipation method: natural air cooling or temperature-controlled automatic heat dissipation;
9. Noise coefficient: ≤30dB

 

Epoxy resin pouring transformer is a solid insulation encapsulated winding power transformer. Epoxy resin dry-type transformer uses epoxy resin as insulation material. High and low voltage winding is made of copper strip (foil), epoxy resin is poured and solidified in vacuum to form high strength FRP body. Insulation grade is F and H. Epoxy resin dry-type transformer has the characteristics of good electrical performance, strong lightning shock resistance, strong short-circuit resistance, small size and light weight etc.. The temperature display controller can   be installed to display and control the operating temperature of the transformer winding to ensure the normal service life of the transformer.

 

Product Parameters

Transformer Type	Resin Cast Dry Type
Model	SCB10-50/10
Number of Phase	Three Phase
Winding Type	Two Winding
Winding Material	Aluminum/Copper
Rated Capacity	50kVA
High Voltage	10/11kV
Low Voltage	0.4kV
Tapping Range	±2x2.5%
Impedance Voltage	4%
Load Loss (120°C)	1kW
No-load Loss	0.27kW
No-load Current	2%
Frequency	50/60Hz
Connection Group	Yyn0/Dyn11
Cooling Method	ANAF
Insulation Class	F
Thermal Class	F1
Protection Level	IP00/IP20/IP30
Climatic Class	C2
Environmental Class	E2
Temperature Rise	100K
Operation Altitude	≤1000m
Size	950x750x915mm
Weight	575kg

 

SCB10 20kva 25kva 50kva 80kva 100kva 160kva 200kva 350kva 400kva 10kv 11kv 0.4kv Dry Type Transformer 500kva 600kva 700kva 750kva 800kva 1000kva 1600kva 2500kva 3000kva 3 Phase Cast Resin Isolation Electric Power Transformers
 

Epoxy resin pouring transformer is a solid insulation encapsulated winding power transformer. Epoxy resin dry-type transformer uses epoxy resin as insulation material. High and low voltage winding is made of copper strip (foil), epoxy resin is poured and solidified in vacuum to form high strength FRP body. Insulation grade is F and H. Epoxy resin dry-type transformer has the characteristics of good electrical performance, strong lightning shock resistance, strong short-circuit resistance, small size and light weight etc.. The temperature display controller can   be installed to display and control the operating temperature of the transformer winding to ensure the normal service life of the transformer.

Company Profile

 

Our company is committed to providing customers with safe, efficient and intelligent power transmission solutions, and has become a leading enterprise in the domestic nuclear power dry-type transformer and new energy box-type substation industry and a leading enterprise in the environmental protection and energy-saving transformer industry.

PERFORMANCE CHARACTERISTICS

1. No oil, no pollution, flame retardant, self-extinguishing and fire prevention.

2. Low loss, high efficiency and low noise. It can run long time under 125% rated load under the forced air-cooling condition and is equipped with intelligent temperature controller. The functions of fault alarm, over temperature  alarm, over temperature trip and black gate. It is connected with computer through RS485 serial interface and achieves centralized monitoring and control.

3. Small local discharge (under 30 PC) and high reliability, can ensure long-term safe operation, life up to 30 years.

4. Resistance to crack and temperature change, high mechanical strength, strong ability to resist sudden short-circuit.

5. Good moisture-proof property, it can run normally under 100% humidity and can be put into operation without drying treatment after shutdown.

6. There is no need for a separate transformer room, core maintenance or load-bearing beam  saving civil land and occupation No oil, so it will not produce toxic gas to pollute the environment.  No need of oil collecting pits or other ancillary buildings which reduces the cost of construction Easy installation, no debugging, almost no maintenance; No need to replace or check the oil, low operation and maintenance cost.

 

Factory workshop

 

 

 

 

 

Certifications

We have established a sound quality management system, and have passed the certification of ISO9001:2015 quality management system, ISO14001:2015 environmental management system, and ISO45001:2018 occupational health and safety management system.

In order to ensure product quality and in order to meet the development and supply of our dry-type transformers in overseas international markets, we all participate in type and special tests of internationally recognized independent testing laboratories, and obtain relevant reports.

 

 

Packaging & Shipping

Product recommendation

 

SERVICE

1. Reply within 24 hours.
2. Perfect service commitment.
3. Provide services during the pre-sales, in-sales and after-sales, all the way (Including quality warranty).
4. Be free of charge in training and tutoring after sales.

 

FAQ

Q: Are you a Manufacturer, factory or Trading company ?   
A: Yes, We are engaging in the research and development, production and operation of transformer for over 60 years.

Q: What's your warranty terms?
A: We offer 12 months warranty time.

Q: Production Time?
A: 30 to 45 days or depending on order requirements.

Q: What's your payment terms?
A: T/T , L/C or negotiation.

Q: How do you conduct quality control in your factory?
A: We implement 100% QC inspection to ensure every product is qualified. We have over 10 times QC inspections during the manufacturing process from raw material to the final products.

Q: Do you have the products in stock?
A: Normally no. All our products produce depending to your order quantity.

Q: How can I trust you ?
A: Pearl Electric is the former state-owned Panyu Electrical Motor Factory established in 1958, Pearl Electric occupies a factory area of 10.5 hectares, with more than 7.2 hectares of modern factory building. Pearl Electric has more than 600 employees and more than 600 sets of specialized manufacturing equipment. We have many patent certificates, CE certificate, KEMA certificate, ISO9001 certificate. Our products are widely used all around the world. We believe that we can provide you products of good quality with competitive price. We are the audited diamond supplier of Made-In-China.

Q: What should provide to make custom transformer ?
A: Technical drawing and technical specification document are  the best, or you can tell us some details technical specification date as below "Quotation and Ordering Required Information".

Q: Could I have your catalog and price list for trial order in MOQ quantity?
A: All of our products are showing on Made-in-China or official website, you are always welcome to ask us to get more information directly.