| Product Name: | Wedge Tension/ Cable Clamp |
|---|---|
| Other Name: | Anchoring/ Strain Dead End/Wedge Strain Clamp |
| Related Products: | Anchor/ Suspension/Insulation Strain Clamp |
| Another Name: | Strain Gun/ Pistol Hose/ Pipe Clamp |
| Classification: | Bolt/ Cable/ Anchoring/ Tube/ Wire Clamp |
| Type1: | Power Fitting/ Cable Accessory/Pole Line Hardware |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Wedge clamp is a non-load-bearing connecting fitting used in power distribution systems.
Wedge-type cable clamps can be divided into cable clamps, bolt-type tension clamps, hydraulic tension-resistant clamps, and explosion-type tension clamps.
Parameter:
NX Series Tension Clamp
| Catalog No. |
Conductor Dia. (MM) |
Dimensions (MM) | Breaking Load (KN) |
Weight (kg) | ||
| C | M | L | ||||
| NX-1 | 6.6-7.8 | 18 | 16 | 150 | 45 | 1.2 |
| NX-2 | 8.7-10.5 | 20 | 15 | 189 | 88 | 2.4 |
| NX-3 | 13.0-14.0 | 24 | 24 | 214 | 143 | 4.4 |
| NX-4 | 14.5-16.0 | 28 | 24 | 238 | 164 | 6.0 |
The following points should be noted when installing wedge clamps:
1. After calculating and determining the length of the steel strands as needed, cut the upper handle and the lower handle respectively, and use wedge-shaped wire clamps to fix and tie the two ends of the upper handle and the connection end between the lower handle and the suspension insulator.
2. The tongue plate of the wedge-shaped cable clamp should be in close contact with the guy wire, and there should be no slippage after being stressed. The protrusion of the cable clamp is on the tail line side. The wire strands should not be damaged during installation, and there should be no obvious loose strands in the bending part of the guy wire.
3. Malleable iron bodies, accessories and all ferrous metal fasteners shall be hot dip galvanized.
4. The strength of the bolt-type tension clamp is not less than 105% of the calculated breaking force of the conductor, or meets the buyer's requirements; the strength of the tension earring is not less than 65% of the calculated breaking force of the conductor.
5. The strength of the compressed tension clamp steel anchor (non-compressed part) is not less than 105% of the calculated breaking force of the conductor or meets the buyer's requirements.
6. The compressed tension clamp diversion plate adopts hydrogen arc welding. The welding seam should be evenly shaped like fish scales. No pores, cracks, missing welds and other defects are allowed. The welding seam height should comply with the drawing requirements.
7. The surface of the aluminum tube should not have defects such as cracks, scratches, peeling, and bruises.
8. The surface of the aluminum plate should be smooth and without scratches, the cutting edge should be chamfered and dethorned, and the electrical contact surface should not be bitten during welding.
Product productive process
Quality Control
HeBei LeiCheng Since its inception, always adhere to the "quality first, credit first" business purpose, constantly develop innovative products, expand the market, and with many scientific research units, colleges and universities work closely and hired professional and technical personnel as guideline, USES the domestic and foreign advanced technology, experienced several years of hard struggle, finally achieved gratifying results.
Our company has products of all specifications and its major products are overhead insulator fittings, poleline accessories, power line fittings, porcelain insulators and so on. The company has a strong technological power, top-ranking production.
The company pays attention to the development of products, research and development at the same time, constantly strengthen the quality management.
Office Environment
Factory
You can rest assured that the packaging of the product, as the last link we strictly control!
Q: Are you a Manufacturer, factory or Trading company ?
A: Yes, We are engaging in the research and development, production and operation of transformer for over 10 years.
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q: Production Time?
A: In general, it take 4~6weeks and it depend on the different style.
Q: What's your payment terms?
A: Pay by T/T and L/C is acceptable.
Q: How do you conduct quality control in your factory?
A: We implement 100% QC inspection to ensure every product is qualified. We have over 10 times QC inspections during the manufacturing process from raw material to the final products.Each of our unit has 3C certificate. If you need any other Certificate, we can help you to apply it.
Q: Do you have the products in stock?
A: Normally no. All our products produce depending to your order quantity.
Q: What should provide to make custom transformer ?
A: Technical drawing and technical specification document are the best, or you can tell us some details technical specification date as below "Quotation and Ordering Required Information".
Q: Could I have your catalog and price list for trial order in MOQ quantity?
A: All of our products are showing on Made-in-China or official website, you are always welcome to ask us to get more information directly.
Our plants produce all electric power fittings, including Cross Arm, Stay wire, Clamp, U bolt, Guy Clip, Thimble Clevis, PD Clevis and more. Related products can be found on our home page, or contact me directly, let me help you!
Welcome to our homepage to see more content!
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}