Three Phase Three Column Amorphous Powerdry Type Distribution Transformer

• Application: Power, Electronic, Instrument
• Phase: Three
• Core: Core-type Transformer
• Cooling Method: Dry-type Transformer
• Winding Type: Two-winding Transformer
• Certification: ISO9001-2000, ISO9001, CCC
• Model NO.: 630kVA ~ 1500kVA
• Usage: Combined Transformer, Power Transformer, Distribution Transformer
• Frequency Characteristics: Power Frequency
• Shape of Core: Ring
• Brand: Leicheng
• Name: 3 Phase Dry Type Transformer
• Model Number: Pec-S-630/11/0.4
• Color: Red
• Use: Distribution Transformer, Cast Resin Transformer
• Type: Dry Type Cast Resin Transformers
• Core Material: Silicon Steel
• Winding: Cooper
• Reference Standards: IEC60076
• Rated Capacity: 630 kVA
• Capacity: 3150kVA or Customized
• Accessories: Fans, Enclosure
• Insulation Level: as Per IEC Standard
• Rated Voltage-Primary: 10kv, 6kv
• Model No.: Epoxy Resin Pouring Transformer
• Weight: Pearl Electric(PE)
• Transport Package: Wooden Case Packing, Container Shipping
• Specification: 125K
• Trademark: PEARL ElECTRIC(PE)
• Origin: China
• HS Code: 8504210000
• Production Capacity: 4000

Product Description

Product Description

SCBH15 series amorphous alloy Dry-Type transformer has advanced performance in
following points: low no-load loss, fire resistance and self-extinguishing, moisture
resistance and maintenance-free. This series product can be applied in any place
where the common dry-type transformer worked, such as airport, bus station, urban
subway, high-rise construction and power station. And SCBH15 transformer can
especially appropriate to be used in the energy-shortage and combustible, explosive
places.

 

Product Parameters

Transformer Type	Resin Cast Dry Type
Model	SCB10-50/10
Number of Phase	Three Phase
Winding Type	Two Winding
Winding Material	Aluminum/Copper
Rated Capacity	50kVA
High Voltage	10/11kV
Low Voltage	0.4kV
Tapping Range	±2x2.5%
Impedance Voltage	4%
Load Loss (120°C)	1kW
No-load Loss	0.27kW
No-load Current	2%
Frequency	50/60Hz
Connection Group	Yyn0/Dyn11
Cooling Method	ANAF
Insulation Class	F
Thermal Class	F1
Protection Level	IP00/IP20/IP30
Climatic Class	C2
Environmental Class	E2
Temperature Rise	100K
Operation Altitude	≤1000m
Size	950x750x915mm
Weight	575kg

 

Product Features
1. No oil, no pollution, flame retardant, self-extinguishing and fire prevention.

2. Low loss, high efficiency and low noise. It can run long time under 125% rated load under the forced air-cooling condition and is equipped with intelligent temperature controller. The functions of fault alarm, over temperature  alarm, over temperature trip and black gate. It is connected with computer through RS485 serial interface and achieves centralized monitoring and control.

3. Small local discharge (under 30 PC) and high reliability, can ensure long-term safe operation, life up to 30 years.

4. Resistance to crack and temperature change, high mechanical strength, strong ability to resist sudden short-circuit.

5. Good moisture-proof property, it can run normally under 100% humidity and can be put into operation without drying treatment after shutdown.

6. There is no need for a separate transformer room, core maintenance or load-bearing beam  saving civil land and occupation No oil, so it will not produce toxic gas to pollute the environment.  No need of oil collecting pits or other ancillary buildings which reduces the cost of construction Easy installation, no debugging, almost no maintenance; No need to replace or check the oil, low operation and maintenance cost.

 

Company Profile

Our company is committed to providing customers with safe, efficient and intelligent power transmission solutions, and has become a leading enterprise in the domestic nuclear power dry-type transformer and new energy box-type substation industry and a leading enterprise in the environmental protection and energy-saving transformer industry.

 

 

 

Certifications

We have established a sound quality management system, and have passed the certification of ISO9001:2015 quality management system, ISO14001:2015 environmental management system, and ISO45001:2018 occupational health and safety management system.

In order to ensure product quality and in order to meet the development and supply of our dry-type transformers in overseas international markets, we all participate in type and special tests of internationally recognized independent testing laboratories, and obtain relevant reports.

 

Packaging & Shipping

 

Factory workshop

 

Product application

SERVICE CONDITIONS - The installation site shall not be flooded by water, the altitude shall not exceed 1000m, and the ambient temperature shall not be higher than 40ºC. The relative humidity is 100%, and the environment is 40ºC to -25ºC (-25ºC requires an on-load tap changer and temperature controller).

PACKAGING & TRANSPORTATION - The products can be partially disassembled and transported (such as on-load tap changer, temperature controller, air cooling device, enclosure, etc. can be packaged separately) or packed as one piece in packaging boxes for transportation.


VISUAL INSPECTION BEFORE INSTALLATION - After opening the package, remove the protective device and check the external conditions, especially paying attention to the mechanical integrity of the coil and iron core, and the bolt fastening at the connection.

INSPECTION BEFORE OPERATION - Measure the DC resistance of high voltage and low voltage windings. Then check the grounding of the iron core to see whether the grounding is reliable and whether foreign matters are overlapping. Last to test the insulation resistance.

ENERGIZING - Before putting into operation, the transformer shall be put into trial operation under no-load, and the protection system shall be checked and adjusted after 3 times of impulse closing.

 

Product recommendation

 

 

FAQ

 

1. Are you a trading company or manufacturer ?
    We are a professional  factory with  10 years experience in the field of High and low Voltage switchgears, Substation,transformers,
cable distribution box and various electrical equipment.
    Our factory is the excellent supplier of State Grid Corporation od China.
2. Do you accept customized serveice ?
    We offer  OEM/ODM service , can print your logo on product . our  professional technical and quotation team can provice a satisfied satisfied project according to your drawing and parameters .
3. What is your MOQ?
    Our MOQ is 1 piece.  
4. How long is your delivery lead time ?
    It depends on your  product requirement and quantity . Generally , 5~10  working days is avaliable .
5. How do you solve quality problems?
    Please porvide detailed photoes of quality problems.  our technical  and quality testing department  will analyse.we will make a satisfied soluton within 2 days .
6. What is your payment terms ?
    30%T/T in adcance,70% before shipment .  West union,L/C are also acceptable .